Heavy-duty cleaning for rail shops
Locomotive shops handle power assemblies, traction motor parts, trucks and bearings — large, heavy, heavily soiled cast iron and steel — which is why this list is built around high-capacity washers, ferrous-metal detergents and rust protection between operations.
The 812 series machines are available in 6 standard sizes up to a 6 ft. dia. turntable with 60″ working height and 2000 lb capacity. The door mounted turntable design is built to provide complete accessibility. The labyrinth door design eliminates the need for expensive replacement seals.
Perfect for larger shops because the 36″ dia. turntable and 42″ of working height it will handle just about any cleaning job with ease (up to 1000 lbs. of parts.) The model 612 has a 7.5 hp. pump that sprays 110 gpm at 60 psi, 12 Kw. electric heat, insulated cabinet, electric lockout, 120 gal, reservoir and 5 cu. ft. parts basket standard.
10HP, 3-Phase seal-less pump Positive turntable drive system High impact spray nozzles for better cleaning Sloped reservoir aids in draining and is easy to clean Insulated cabinets are energy efficient and provides quiet operation Roll-out turntable design Labyrinth style door – no seals
The 4060 design is more than 40 years old as it meets the demand for heavy duty loads as well as tall parts. The roll-out cart gives it a special capability for overhead loading of heavy parts. It’s typical configuration includes, as standard, a high pressure pump for the dirtiest jobs.
The large open cavity of the 4848 is allows for large parts or a large number of smaller parts. The wrap around door gives good access from overhead lifting devices for heavy loads. The unit can be customized for the a particular job including manifold configuration, heat source, pumps or special fixtures.
The Cuda 2848 features a turntable diameter of 28-inches, working height of 48-inches, and load capacity of 750 lbs. The 2848 Series is equipped with a 5 HP vertical seal-less pump producing 110 GPM at 50 PSI.
At only 32 inches wide, the Cuda 2216 Series parts washer is our most compact top-loading parts washer. The Cuda 2216 Series has a 500-lb. load capacity, and a 22-inch turntable diameter. The Cuda 2216 Series has a 1 HP pump motor producing 28 GPM @ 30 PSI.
Dimensions: 56” long (add 24” with drain shelf) x 40” wide x 36” high Cleaning tank: 42” long x 30” wide x 18” deep Overflow tank: 42” long x 6” wide x 18” deep Total liquid capacity: 105 gallons Ultrasonic Power: 10,800 watts peak / 5400 watts avg. Heat Power: 4000 watts Electrical Requirements: 208V, 3Ø
Cleaning Tank: 60" x 30" x 26" Total Liquid Capacity: 240 Gallons 1000 lb Agitating Lift Table
TRANSBRITE 1000 Powder Detergent is FERROUS METAL ONLY, engineered to produce superior cleaning results for the removal of the toughest contaminates on all ferrous metal surfaces including cast iron, iron & steel. TRANSBRITE 1000 is also a powerful paint & rust stripper that provides a one-step cleaning process. TRANSBRITE 1000 performs in all SOLVENT-FREE, aqueous industrial parts washers.
TRANSBRITE 3000 Liquid Detergent is FERROUS METAL ONLY, engineered to produce superior cleaning for the removal of the toughest contaminates on all FERROUS METAL SURFACES including cast iron, iron & steel. TRANSBRITE 3000 is also a powerful paint & rust stripper that provides a one-step cleaning process TRANSBRITE 3000 performs in all SOLVENT-FREE, aqueous industrial parts washers.
TRANSBRITE UltraSONIC Liquid Detergent is ALUMINUM SAFE, MULTI-METAL cleaning of the toughest contaminates on all metal & plastic surfaces. TRANSBRITE UltraSONIC produces superior cleaning results reaching into the smallest cavities, worm tracks or blind holes found in transmission valve bodies, fuel injectors, engine heads and other transportation related assemblies & components. TRANSBRITE UltraSONIC performs in all SOLVENT-FREE, aqueous industrial ultrasonic equipment.
TRANSBRITE TurboCHARGE Additive is a Premium Quality Liquid Booster that is engineered to be used with all TRANSBRITE Detergents when additional carbon removal is necessary. TRANSBRITE TurboCHARGE is specifically designed to quickly and effectively attack and remove carbon byproducts produced by the combustion process, such as burnt on carbon, oil, grease, and all other contaminants. TRANSBRITE TurboCHARGE can be directly added into the wash sump or immersion tank of all aqueous industrial parts washers.
TRANSBRITE RustFREE Liquid Inorganic Rust Inhibitor is engineered for when additional corrosion, oxidation or rust protection is needed. TRANSBRITE RustFREE is specifically designed to provide in-process rust protection of parts and for short-term part storage. TRANSBRITE RustFREE provides superior rust protection in wash and final rinse sections of all aqueous industrial parts washers.
TRANSBRITE FoamFREE Liquid Foam Suppressant is compatible and used with all TRANSBRITE detergents when additional foam control is necessary. TRANSBRITE FoamFREE is specifically designed to quickly eliminate foaming caused by certain equipment types & designs, water quality, types of soils being cleaned and heavy soil loading. TRANSBRITE FoamFREE provides superior foam control in wash and rinse sections of all aqueous industrial parts washers.